Greenhouse Build
Buildings
How to Pour a Concrete Pad
- Prepare the site and install a 6-mil plastic sheet as a vapor barrier.
- Build a form around the perimeter of the pad using 2x4 or 2x6 lumber.
- Mix the concrete according to the instructions and pour it into the form.
- Use a trowel or screed board to level and smooth the surface of the concrete.
- Cover the pad and let it cure for at least 3 days.
- Remove the form and fill any gaps with concrete patching compound.
Remember to follow all safety precautions when working with concrete, and check the weather forecast before pouring.
Build an Amazon Metal Building
Having a small 8'x6' metal building in the backyard can offer a variety of benefits. Firstly, it provides a secure and durable storage solution for items that may not fit in the house or garage, such as lawn equipment, bikes, and tools. Secondly, it can serve as a hobby or workshop space, giving you a dedicated area to work on projects or pursue your interests. It can also be used as a playhouse for children or a cozy retreat for adults. Finally, a small metal building can add value to your property and be an attractive feature in your backyard, enhancing the overall aesthetics of your home. Overall, a small metal building in the backyard offers practical, functional, and aesthetic benefits.
Spray Foam Insulation
- Prepare the area by removing any debris or obstructions and covering the floor with a protective material.
- Put on protective gear, including gloves, goggles, and a respirator, as spray foam insulation can be hazardous if it comes into contact with skin or is inhaled.
- Set up the spray foam insulation equipment according to the manufacturer's instructions.
- Spray the closed cell spray foam insulation onto the walls and ceiling of the metal building, following a consistent pattern and applying a uniform thickness.
- Allow the insulation to dry and cure according to the manufacturer's instructions.
- Trim any excess insulation that may be protruding beyond the wall or ceiling.
- Clean up any remaining debris or excess insulation and dispose of it properly.
It's important to follow all safety precautions and manufacturer instructions when using spray foam insulation. When in doubt, consult with a professional insulation installer to ensure the job is done safely and correctly.
Basics
Under Ground Electric
Building Rafters
Odd Builds
Romantic Trail Bench
Not Your Father's Firewood Storage
Gate Install
How To Install Topens Single/Double DIY Gate Opener with Solar
We installed our Topens Double Gate Opener and made a "how-to" video. I think the installation worked out very well. Gate Opener and Supplies
Link to Topens: https://amzn.to/3EOfXUP
Batteries and Box: https://amzn.to/3AyhEDg
Wire: https://amzn.to/3GwjmZl
How to Install a Double Gate
We are installing double gates on our property. This video is about a large double gate, but all gates have the same principles. Gate Installation doesn't have to be hard and can be done with simple tools. We used Fast2K to install our post. See the link to @Fast 2K below. #builditfast2k Buy Fast2K: LOWE'S https://www.lowes.com/pd/Fast-2K-Fast-2K-Deck-Post-Anchor/5001643775
Fast2K Info: https://fast2k.com/product/deck-post-anchor/
How to install a gate
We are installing gates on our property. This video is about a large gate, but the principles are the same in all gates. Gate Installation doesn't have to be hard, and it can be done with simple tools. We used Fast2K to install our post. See the link to @Fast 2K below. #builditfast2k
Copyright © 2023 Tony's Tractor Adventures Homestead - All Rights Reserved.
Powered by GoDaddy
Cookie Policy
This website uses cookies. By continuing to use this site, you accept our use of cookies.